Click on image to zoom

BD Diesel Transmission - 2007.5-2010 Dodge 68RFE 2wd w/White connector 1064242

1064242

Transmission - 2007.5-2010 Dodge 68RFE 2wd w/White connector

Pricing: $3,995.00

Customize Your Item

- Auto Trans Assembly -
 * required
Qty:

Description

Requires $ 2,000.00 Refundable Core Deposit

Roller bearings throughout
Pan adds 4.5qt extra oil capacity
New pump regulator valve design
Custom BD valve body separator plate
Custom BD accumulator plate
Hard ANODIZED Valve Body
BD uses hard anodized valve bodies to prevent wear at the SSV bore causing sticky valves and/or cross leaks from conventional valve bodies
Symptoms caused by SSV bore wear are:
1. Limp-in mode
2. Pressure switch rationality codes
3. Erratic TCC apply
4. No lockup
5. L/R switch code
Protech68 Pressure Control module
1. Deliver up to 275 PSI clutch apply pressure
2. Providing 150% more holding force above stock to prevent clutch slippage
3. Dynamically adjusts the hydraulic apply pressures based on MAP
4. Ramps up the much larger sweep
Machined lower pressure plate
Machined reverse pressure plate
4C piston spring retaining lock
2C piston special machining for additional clutch fiber and steel plates
2C apply piston modified to accept new heavier Billet retainer
2C Steel girdle is applied to strengthen piston and give a broader apply area
BD exclusive, heavy duty constructed cam and roller style one-way clutch
Clutch Count: OVERDRIVE 7
Clutch Count: UNDERDRIVE 6
Clutch Count: 2C 4
Clutch Count: 4C 3
Clutch Count: REVERSE 2
Clutch Count: LR 7
Increase the durability of your drivetrain
Revised oil circuits
Handles up to 300% more power and torque than the stock transmission
Extra clutches and stronger internals
BD rigid aluminum heavy duty transmission pan
Pan reduces case flex
Pan reduces internal oil leakage
Pan heat-dissipating fins keep temperature down
Pan magnetic drain plug
Not warranted for Race or Sled Pull use
Each transmission is dyno tested
Warranty

Parts
36-Months
150,000 Miles
Labour
12-Months
24,000 miles
Note
No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet.
Note

2010-2011 model years could have either an early or late model 68RFE transmission which there are two methods of indicating which model you are working on: Primary Indicator: Two letter suffix of transmission number on label (or peened) on side of case or also found below the main connector on the drivers side: AA / AB / AC / AD - Early Model - AE / AF / AG - Late Model. Alternative Indicator: If valve body is dissembled, the number of check balls will direct you to the correct application: 7 Check Balls - Early Model - 5 Check Balls - Late Model
BD Torque Converter strongly suggested with install of transmission

Vehicle Fitment

Vehicle information for 1064242

Extended Information

  • CA
  • 1
  • Y

Shipping Information

  • Item Requires Shipping
  • 240.0 lbs.
  • W44.5000” x H27.3000” x L23.5000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.