FASS Fuel Systems High Performance Diesel Lift Pump 1998.5-2004.5 Dodge Ram Cummins Titanium Signature Series 250GPH (TS D08 250G)
The Titanium Signature Series diesel fuel system was engineered b...
Description: FASS Fuel Systems High Performance Diesel Lift Pump 1998.5-2004.5 Dodge Ram Cummins Titanium Signature Series 250GPH (TS D08 250G)
The Titanium Signature Series diesel fuel system was engineered...More Details »
These tappets work with all 1989-2016 Dodge Cummins engines. At 1.45? they will not have interference with the Fuel pump eccentric on 12v engines and are much wider than the 1.1? tappets used in ea...
Description: These tappets work with all 1989-2016 Dodge Cummins engines. At 1.45? they will not have interference with the Fuel pump eccentric on 12v engines and are much wider than the 1.1? tappets used in...More Details »
Item #: 07-t-001
Condition: New
Availability based on dealer stock!
Price: $159.00
178/208 Cast CamNew
Towing and Efficiency cam used for daily drivers and smaller turbos.
Description: Towing and Efficiency cam used for daily drivers and smaller turbos.
Item #: 07-C-178/208S
Condition: New
Availability based on dealer stock!
Price: $699.00
188/220 Steel CamNew
Steel Billet Core. Block bushings are required when running high rpms and high valve spring pressures.
This cam can be ran with no modification in a 2003 and up block with two factory cam bushings...
Description: Steel Billet Core. Block bushings are required when running high rpms and high valve spring pressures.
This cam can be ran with no modification in a 2003 and up block with two factory cam...More Details »
Description: 1994-2002 Dodge 5" Race Exhaust with Muffler
Item #: D501TB
Condition: New
Availability based on dealer stock!
Price: $489.00
24 Valve Retainers - Tool Steel New
If you are running over 4,500 rpm and have a cam with over .320? lobe lift, then I suggest these light retainers. Titanium for cams with over .370? lift.
As a precautionary measure, please inspect...
Description: If you are running over 4,500 rpm and have a cam with over .320? lobe lift, then I suggest these light retainers. Titanium for cams with over .370? lift.
As a precautionary measure, please inspect...More Details »
Item #: 07-S-004
Condition: New
Availability based on dealer stock!
Price: $99.00
240/260 Steel Roller CamNew
Requires dual or triple springs, longer valves, bushings and .250? reliefs. For large 3.0 trucks that need more air up top, unlimited single applications that spin big and super stock pullers.
Description: Requires dual or triple springs, longer valves, bushings and .250? reliefs. For large 3.0 trucks that need more air up top, unlimited single applications that spin big and super stock pullers.
Item #: 07-C-240/260SR
Condition: New
Availability based on dealer stock!
Price: $999.00
Air Lift Company - Load Controller Dual Heavy Duty Compressor New
Part Number: 25856
Dual Path On-Board Air Compressor System with Heavy Duty Compressor
Description: Part Number: 25490
SmartAir II fits leaf sprung vehicles only.
Automatic Leveling – Single Path
Increased Convenience
Easy Installation
Item #: 25490
Condition: New
Price: $595.89
Air Lift Company - WirelessONE (2nd Generation)New
Part Number: 25980 - SD Compressor
Also available with EZ Mount™ installation bracket: P/N 25980EZ.
Single-path control: Left and right air springs are inflated/deflated equally
Wireless han...
Description: Part Number: 25980 - SD Compressor
Also available with EZ Mount™ installation bracket: P/N 25980EZ.
Single-path control: Left and right air springs are inflated/deflated equally
Wireless...More Details »
Item #: 25980
Condition: New
Price: $525.95
Air Lift Company - WirelessONE (2nd Generation)New
Part Number: 25980EZ - HD Compressor
Includes EZ Mount™ installation bracket with upgraded compressor.
Single-path control: Left and right air springs are inflated/deflated equally
Wireless...
Description: Part Number: 25980EZ - HD Compressor
Includes EZ Mount™ installation bracket with upgraded compressor.
Single-path control: Left and right air springs are inflated/deflated equally
Wireless...More Details »
For use with mechanically injected engines with helical cut cam gears. The bolt on retainer will ensure that the cam gear is not pushed off of the cam in high rpm, high fuel delivery situations.
C...
Description: For use with mechanically injected engines with helical cut cam gears. The bolt on retainer will ensure that the cam gear is not pushed off of the cam in high rpm, high fuel delivery situations....More Details »
Item #: 07-C-002
Condition: New
Availability based on dealer stock!
Price: $39.99
Cam Bearing - 54mm SingleNew
These high performance bearings are made in the USA for Hamilton Cams.
For use when replacing the OEM bearings. 12 valve engines have one bearing on the first journal. Some Common rail engines hav...
Description: These high performance bearings are made in the USA for Hamilton Cams.
For use when replacing the OEM bearings. 12 valve engines have one bearing on the first journal. Some Common rail engines...More Details »
Item #: 07-C-HC1
Condition: New
Availability based on dealer stock!
Price: $18.99
Cam Bearing - 55mm Set (7)New
These high performance bearings are made in the USA for Hamilton Cams.
For use when replacing the OEM bearings. 12 valve engines have one bearing on the first journal. Some Common rail engines hav...
Description: These high performance bearings are made in the USA for Hamilton Cams.
For use when replacing the OEM bearings. 12 valve engines have one bearing on the first journal. Some Common rail engines...More Details »
Item #: 07-C-HC2-S
Condition: New
Availability based on dealer stock!
Price: $125.00
Cam Bearing - 55mm SingleNew
These high performance bearings are made in the USA for Hamilton Cams.
For use when replacing the OEM bearings. 12 valve engines have one bearing on the first journal. Some Common rail engines hav...
Description: These high performance bearings are made in the USA for Hamilton Cams.
For use when replacing the OEM bearings. 12 valve engines have one bearing on the first journal. Some Common rail engines...More Details »
Item #: 07-C-HC2
Condition: New
Availability based on dealer stock!
Price: $18.99
Cold Air Intake For 1994-2002 Dodge Ram Cummins 5.9L (Dry Filter)New
Description:
Cold Air Intake Kit (Cleanable, 8-ply Cotton Filter)
Item #: 75-5090
Condition: New
Price: $349.00
Cometic Gaskets .036" MLS Cylinder Head Gasket, 4.040" Gasket Bore. Each C5554-036New
Chrysler/Dodge 318/340/360 V8 MLS Head Gasket. 4.040" Gasket Round Bore. Comprised of mulitple embossed layers of stainless steel with the outer layers utilizing a viton rubber coating. Compre...
Description:
Chrysler/Dodge 318/340/360 V8 MLS Head Gasket. 4.040" Gasket Round Bore. Comprised of mulitple embossed layers of stainless steel with the outer layers utilizing a viton rubber coating....More Details »
Item #: C5554-036
Condition: New
Price: $78.19
Cometic Gaskets .040" MLS Cylinder Head Gasket, 4.040" Gasket Bore. Each C5554-040New
Chrysler/Dodge 318/340/360 V8 MLS Head Gasket. 4.040" Gasket Round Bore. Comprised of mulitple embossed layers of stainless steel with the outer layers utilizing a viton rubber coating. Compre...
Description:
Chrysler/Dodge 318/340/360 V8 MLS Head Gasket. 4.040" Gasket Round Bore. Comprised of mulitple embossed layers of stainless steel with the outer layers utilizing a viton rubber coating....More Details »
Item #: C5554-040
Condition: New
Price: $77.99
Cometic Gaskets .040" MLS Cylinder Head Gasket, 4.040" Gasket Bore. Each C5565-040New
Chrysler/Dodge 318/360 Magnum 5.2/5.9L V8 MLS Head Gasket. 4.040" Gasket Round Bore. Comprised of mulitple embossed layers of stainless steel with the outer layers utilizing a viton rubber coa...
Description:
Chrysler/Dodge 318/360 Magnum 5.2/5.9L V8 MLS Head Gasket. 4.040" Gasket Round Bore. Comprised of mulitple embossed layers of stainless steel with the outer layers utilizing a viton rubber...More Details »
